These are functions of the PHY. If the file does not exist, the following table is used:. This command should be used only for add-in adapters. Enter a user name ods is valid on broadcom 57xx dos Windows system to which you will be attaching. If the file does not exist, a default register offset and mask bits are used. I used my PC to download the latest drivers claimed to be for Windows 10 from the Broadcom web site, copied them to a. The following tests are performed:.
|Date Added:||16 October 2013|
|File Size:||15.58 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
This package contains the drivers for Broadcom NetXtreme Gigabit Ethernet Controllers in the supported desktop models and operating systems. This test sets the reset bit and polls for self-clearing bits. Verify that the Broadcom NetXtreme Gigabit Ethernet adapter driver software has been broadcom 57xx dos on your system.
The test brodcom moves data back to the host memory to again verify the data.
This test tests the onboard scratchpad SRAM. This test writes test data into the SRAM, writes complement test data to the next address, and reads back both to ensure the data is correct. Use the file that is appropriate for the type of hardware interface copper or fiber. This test performs in the same way as the Scratch Pad Test described in B1.
Do not use them unless you are familiar with PCI device configuration. Specify which individual test s within a group or which group s of tests to run by including the test designation or group designation in the command string, as shown in the examples below:.
The test fills the test range with test data and reads ods data back to verify the content.
The following tests are performed: This test uses 8 data test patterns. This test tests the PCU instruction fetch logic times. A 0xsized data buffer is used for this test.
You cannot quote because this article is private. This test verifies the reset value of the registers.
This test opens the Cpu. After filling the entire address with the unique data, the program reads back the data again to ensure that the 5xx is still correct.
The 5xx test patterns are described below. Specifies the adapter to test, or the adapter on which to update the firmware or to view or change the settings for available properties.
For Vista systems, the driver software 57sx been installed for you. Continues to count up to Then, the test performs a receive DMA from the adapter to the host. After completing the file extraction, if the Self-Extractor window is still open, close it. The program takes only a few broadcom 57xx dos to compute the checksum of most files.
The test attempts to read the register configuration file Miireg. This can broadcom 57xx dos done in the Hyper-V Manager. Refer to PCI Specification, version 2. This test tests the autopolling and PHY interrupt capabilities. To see if there are any 3rd party drivers bound to the miniport driver, open device manager, click on sos hidden devices, Network Adapters.
If the connection is successful, a dialog box appears. The same test is repeated for entire test range. You may make one copy of the Software solely for backup or 57xz purposes, or transfer it to a single hard dow or broadcom 57xx dos device provided you keep the copy solely for backup or archival purposes.
The test moves data from the host memory to the adapter SRAM and verifies the data.