Caution Dust that accumulates between the plug terminals may cause a fire. FS Staples for staple binding 5, staples are provided in the staple cartridge. Page 96 Check the print result to make sure that the left margin for the second side is adjusted to between 2. Page 5 Display in Enlarge Display Mode Function Combination Table 8. If any caution labels or caution indicator is soiled, please clean to make legible.
|Date Added:||25 January 2014|
|File Size:||47.83 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
The number of pages that can be stored will vary depending 80331 the document. Page Close the duplexing feed guide. The specified permissions are set. The list of counters is printed.
When The Message “replace The Toner Cartridge” Appears Do not replace the toner cartridge until the message indicating that it be replaced appears in the touch panel. The default setting is [Yes].
Open the duplex unit door. Note Be careful not to touch the surface of the paper take-up roller with your hands. When a finisher is installed and the staples are jammed, the message shown below appears.
Since the toner for the indicated color has run out, the copier is unable to make copies. Select the desired color mode.
The number of copies that can be made from the time that the message appears warning that the toner is almost empty until the time that the message appears indicating that the toner is empty differs depending on the specified copy settings.
Peel off the tape. Close the duplex unit door.
Note If stapling still cannot be performed, even after performing the above procedure, contact your authorized service representative. Pull out the paper drawer, and then remove any misfed paper. Remove any misfed paper. To check the specified settings of a program Minklta [Check], and ,inolta touch the number of the program that you wish to check. LED-cleaning tool Used to clean the surface of the LED unit, for example, when replacing the image transfer belt unit. Close the left-side and right-side misfeed-clearing covers.
If you cannot make them legible, or if the caution label or indicator is damaged, please contact your authorized service representative for replacement labels. Note Be sure to support the door while carefully opening it, otherwise it may be damaged.
Page Remove the protective cap.
Remove any paper, and then close the cover of the horizontal transport unit. Other Messages Replace the toner cartridge replaced soon. Explanation Of Basic Concepts And Symbols During copying, paper is supplied from the right side of the copier and fed into the copy tray on the top or the finishing option at the left with the printed surface of the copy facing down. Touch [Color Shift Correction Y ] and repeat the same procedure for the yellow shift.
Inside Of Copier Used to remove the imaging unit.
Load the paper in the drawer again, and then close the drawer. Touch [2in1, 4in1, Munolta Copy Zoom]. Metallic parts on the inside of upper cover FN1 are very hot.
Touching [Exit] in the top-right corner displays the Basic screen again. If the paper is pulled 80331 in any way other than that described below, the stapler unit may be damaged. Page Page – To clear a paper misfeed in the duplex u Check the print result to make sure that the top margin is adjusted to between 4.